The BELLCOMMS 350Mhz Outdoor Single Jacket for use as horizontal,vertical,arieal and under ground cable in generic cabling systems. The STP cable has solid copper conductors insulated with PE. The cable is supplied with MDPE or HDPE Jacket. All cables are approved in accordance with the most stringent test procedures. They are also 3P and ETL Verified in accordance with the following standards: ISO/IEC 11801, TIA/EIA 568B.2 ,IEC61156,UL444

Specification :

Application:Supports Voice, 155/622 Mbps ATM, 270 Mbps digital video, 4/16 Mbps Token Ring, 100 Mbps

TP-PMD, Supports 10BASE-T Ethernet, 100BASE -TX Fast Ethernet, Supports 1000BASE-T Gigabit Ethernet, and Broadband video, 100mbps TPDDI, ISDN Broadband video, ISDN

Standards :TIA/EIA 568A/B Category 5E, ISO/IEC11801  class-D(2000), TIA/EIA-568A-5 CENELEC EN501373, UL & cUL, IEC61156-5 and IEEE802.3

Number of Pairs :4 Pairs, 24AWG

Sheath Material   :MDPE, HDPE

Conductot dismension:0.51mm.

Insulation diameter:1.0mm. PE

Insulation Color:BLUE / Whte-Blue ORANGE / White-Orange GREEN / White-Green BROWN / White-Brown

Cable diameter:6.2 +/- 2.0 MDPE or HDPE sheath

Shield material :AL-Mylar

Drain Wire:0.5mm. Tinner Copper

Ripcord  :750D Nylon yarn

Cable Properties :Bending Minimum bending radius installed 4 x D Temperature window Operation -20C to +60C

Features :

Operating frequency:1 - 350 MHz

Impedance:100 +/- 15 Ohm

Mutual Capacitance max nF/1000ft ( pF/ft:17.1

DC Resistance max Ohm/1000ft:28.6

DC Resistance unbalance of a pair:   5% max

Capacitance Unbalance ( Pair to Ground ):     330pF/100m max

Propagation Delay Skew    :45nS/100m

Nominal OD:6.2mm.

Conductor:24AWG solid bare copper

Insulation:HDPE

Jacket:MDPE or HDPE