Introduction:

BC5008G-8POE-150W-P (220VAC) is Full gigabit ,8-port Gigabit high power (IEEE 802.3at) PoE Switches, utilizing a compact factor which can be mounted in a 19-inch rack with rack-mounting kits or placed on desktop.With data and power supported by one unit, the

BC5008G-8POE-150W-P (220VAC) shall reduce cables and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. Auto PoE detection and Plug and play installation makes BC5008G-8POE-150W-P (220VAC) Gigabit PoE Switch easy to use and with clear LED indicators to tell the working condition.

Features:

1.Compatible with both IEEE802.3at(30W) and IEEE802.3af (15.4W)

2.Automatically detect and supply power to IEEE802.3at and     IEEE 802.3af compliant powered devices (PDs)

3.Advanced SAFC function, only supply power to IEEE 802.3af/at compliant PDs, no worry about damaging other private standard POE devices or devices without POE function

4.Support port power supply prioritization, guarantee the continuous    power supply of key nodes

5.Up to 100m network cable transmitting distance

6.Built-in PSE power supply module, plug-and play design, easy to install

7.High security performance defending against power surge

8.Support short-circuit protection function

9.Energy-saving green design, support auto-switch to standby mode and auto-detect cable length.

10.Support simple WEB management, easy to configure the functions of switches

Physic Medium

10/100Base-TX: UTP category 3/4/5 cables (Maximum 100m)

1000Base-T: UTP Category 5 cable (Maximum 100m)

Network Cable Deployment:Support Auto-MDIX function, automatically identify straight forward cable and cross-over cable

Negotiation Pattern:Support port auto-negotiation function (automatically negotiate transmission                                 rate and Duplex modes)

Maintenance: Detect the connectivity of network cables, Uploading  or downloading of the configuration data, Uploading of upgrade patch, WEB-based reset  to factory defaults, Support port short-circuit reset to factory defaults

Management: Support WEB-based management

Indicator light

Interface light: Link/Act, POE Status

Power light: PWR

Power

Input Power Supply: 90~264VAC/50~60Hz/150W

Energy Saving: Comply with “EEE” Energy Efficient Ethernet

Working Environment

Working Temperature: -20~50°C

Storage Temperature: -40~70°C

Operation Humidity: 10%~90%(non-condensing)

Storage Humidity: 5%~95%(non-condensing)

Mechanical Properties

Weight: <1.5Kg

Dimensions (L×W×H): 280×180×44mm

Specification:

Technology

Standard and Protocols:  IEEE 802.3af, Power Over Ethernet,                                              

IEEE 802.3at, Power Over Ethernet Plus

                                                IEEE 802.3u, 100BASE-TX, IEEE 802.3ab,                                                  

1000BASE-T, IEEE 802.3z, 1000 BASE-X,                                                             

IEEE 802.3ad, Static or Dynamic Link                                                  

 Aggregation, IEEE 802.3x, Full-Duplex                                                                Flow Control, IEEE 802.3az, EEE (Energy                                                                                  Efficient Ethernet), IEEE 802.1q, VLAN,                                                        IEEE 802.1p, QoS/CoS, IEEE 802.1d,                                                                          

STP (Spanning Tree Protocol), IEEE 802.1w, RSTP(Rapid Spanning Tree Protocol)

POE Standard:   IEEE802.3af/at

Port Flow control:Back-pressure traffic control under Half-Duplex  mode, IEEE 802.3x traffic control under Full-Duplex  mode

Ports

Fixed ports: 8*10/100/1000M PoE Ports        

PoE Pin-out: 1/2(+), 3/6(-); Customized 4/5(+),7/8(-)

Exchange Properties:

100M forwarding rate: 1488095pps

100M forwarding rate: 148809pps

10M forwarding rate:     14880pps

Transmit type:  Full wire-speed storage and forwarding

MAC address: 8K, Support auto-update, two-way learning

VLAN:  Support up to 4096 VLANs, Port-based VLANs,   VLANs based on IEEE 802.1q

Switching Capacity:  ≥16Gbps

Spanning Tree: Spanning Tree Protocol Rapid Spanning Tree Protocol (RSTP)

Link Aggregation:  Support 2 aggregation groups, and a maximum of 4 ports in each aggregation group

Port Mirroring: Support bi-direction port mirroring

Ring Protection:     Support Ring Protection, provide real-time                                                                                          detecting, quick alarm, precise localization, smart                                                                                             blocking and auto-recovery

Port Isolation:Isolation between downlink ports without influence                                                                                          the communication between downlink and uplink                                                                                   ports

Port Flow Control:Back-pressure traffic control under Half-Duplex   mode,IEEE 802.3x traffic control under           Full-Duplex mode

Port Rate Restriction:Port-based ingress or egress rate limiting

Jumbo Frame:   Maximum support 9216Byte

Multicast Control: Support IGMP Snooping

Storm Suppression:Support the suppression of broadcast storm  based on forwarding rate

Security:Port-base MAC address binding,Security restriction  on port-based MAC address quantity

QOS:   SP (Strict Priority), WFQ (Weighted Fair Queuing), WRR    (Weighted Round Robin), 802.1p (Port Queuing Priority),  Differentiated Service Code Point (DSCP Priority)

PoE ouput priority Management: Supported