Features:
1.Compatible with both IEEE802.3at(30W) and
IEEE802.3af (15.4W), can supply power to PDs under these two standards
2.Automatically detect and supply power to
IEEE802.3at and IEEE 802.3af compliant
powered devices(PDs)
3.Advanced SAFC function, only supply power to
IEEE 802.3af/at compliant PDs, no worry about damaging other private standard POE
devices or devices without POE function
4.Support port power supply prioritization,
guarantee the continuous power supply of key nodes
5.Up to 100m network cable transmitting
distance
6.Built-in PSE power supply module, plug-and
play design, easy to install
7. High security performance defending against
power surge
8.Support short-circuit protection function
9.Energy-saving green design, support auto-switch
to standby mode and auto-detect cable length.
10.Support simple WEB management, easy to
configure the functions of switches
Physic
Medium
10/100Base-TX: UTP category 3/4/5 cables (Maximum 100m)
1000Base-T:UTP Category 5 cable
(Maximum 100m)
1000Base-SX:fiber with 850nm wavelength,
supports a max transmission distance of 550m
1000Base-LX:fiber with 1310nm/1550nm
wavelength, supports a max transmission distance of 80km
Network
Cable Deployment:Support Auto-MDIX function, automatically identify straight forward cable and cross-over cable
Negotiation
Pattern: Support
port auto-negotiation function (automatically negotiate transmission rate and
Duplex modes)
PHY
Detection:
Detect the connectivity of network cables
Maintenance:Detect the connectivity of
network cables, Uploading or downloading of the configuration data, Uploading of upgrade
patch, Support system logs, WEB-based
reset to factory defaults
Management: Support WEB-based
management
Indicator
light
Interface
light: Link/Act,
POE Status
Power
light: PWR
Power
Input Power
Supply:
90~264VAC/50~60Hz/150W
Energy
Saving:
Comply with “EEE” Energy Efficient Ethernet
Working
Environment
Working
Temperature:
-20~50°C
Storage
Temperature:
-40~70°C
Operation
Humidity:
10%~90% (non-condensing)
Storage
Humidity:
5%~95% (non-condensing)
Mechanical
Properties
Weight: <2Kg
Dimensions
(L×W×H):
280×180×44mm
Specification:
Technology
Standard
and Protocols: IEEE 802.3af, Power Over Ethernet, IEEE
802.3at, Power Over Ethernet Plus
IEEE
802.3u, 100BASE-TX, IEEE 802.3ab, 1000
BASE-T, IEEE 802.3z, 1000 BASE-X, IEEE
802.3ad, Static or Dynamic Link Aggregation,
IEEE 802.3x, Full-Duplex Flow
Control, IEEE 802.3az, EEE (Energy Efficient
Ethernet), IEEE 802.1q, VLAN
IEEE
802.1p, QoS/CoS, IEEE 802.1d, STP
(Spanning Tree Protocol), IEEE 802.1w, Rapid
Spanning Tree Protocol, IEEE 802.1s, Multiple
Spanning Tree Protocol
POE
Standard:
IEEE802.3af/at
Flow
control:Back-pressure
traffic control under Half-Duplex mode, IEEE 802.3x traffic control under
Full-Duplex mode
Ports
Fixed
ports: 8*10/100/1000M
PoE ports+2* Gigabit SFP ports
PoE
Pin-out: 1/2(+),
3/6(-); Customized 4/5(+), 7/8(-)
Exchange
Properties:
100M
forwarding rate: 1488095pps
100M
forwarding rate: 148809pps
10M
forwarding rate: 14880pps
Transmit
type: Full
wire-speed storage and forwarding
MAC
address:8K,
Support auto-update, two-way learning
VLAN:Port-based VLANs\
Port-protocol-based VLANs\ ACL-based VLANs, 4K-entry Vlan Table, Supports flexible Q-in-Q and Vlan
Tag function, VLANs basedon IEEE 802.1q
Switching
Capacity:≥9.2Gbps
Spanning
Tree: Spanning Tree Protocol,
Rapid Spanning Tree
Protocol (RSTP),
Support Multiple Spanning Tree
Protocol
Link
Aggregation: Support 8 aggregation groups,
and a maximum of 8 ports in each aggregation group
Port
Mirroring:Support
bi-direction port mirroring, RSPAN function for remote mirroring
Port
Isolation:Isolation
between downlink ports without influence the communication between downlink and uplink ports
Port Flow
Control:Back-pressure
traffic control under Half-Duplex mode,IEEE 802.3x traffic control under Full- Duplex mode
Port Rate
Restriction:Port-based
ingress or egress rate limiting
Storm
Suppression:Support
the suppression of broadcast storm based on forwarding rate
Multicast
Control:Support
IGMPv1/2/3 and MLDv1/2 Snooping;
Security: 1.5K entry ACL Table, Attack
Prevention (Land attack\ Blat attack\Ping attack\TCP control flag attack), MAC &
Port based Security, 802.1x port based security, TCP/UDP port based Security
QOS:SP (Strict Priority), WFQ
(Weighted Fair Queuing), WRR (Weighted Round Robin), 802.1p (Port Queuing
Priority),Differentiated Service Code Point (DSCP Priority)
IPv6: IPv6 Parsing PoE ouput
priority Management: Supported