The BELLCOMMS RJ45 High Petformance Category6 UTP Patch Cable is the perfect performance upgrade. Used to replace any Cat5 cable that fails to support 100 Base-T or Gigabit Ethernet. With RJ45 male-to-male connectors and a snagless moded strain relief.

Advantages :

•Perfect in conjunction with 100 Base-T and Gigabit Ethernet networks.

•50 micron gold plated connectors to ensure a clean and clear transmission.

•Snagless molds protect the RJ45 tap from being damaged during  installation.

•Capable of improving the return loss in your current network by 40%.

•Backed by Belkin Lifetime Warranty.

•Exceeds the performance requirement of Category6. PowerSum tested.

•Internal load bar assures accurate positioning of pairs and consistent  high Performance.

•2-row staggered pin configuration to control cross-talk at hyper-frequency. 

BELLCOMMS Patch Cord Cable meet the following standard. :

•IEC 754-part2 2.H band on pH and conductivity Measurements.

•IEC 7034 part 2, Smoke Emissions

•IEC 332 part 1, Flammabiblity and Fire Retardant

•NES 713, Toxicity Index.

•ISO/IEC 11801, TIA/EIA 568-B

Electrical Characteristics :

Dielectric Strength:1,000V RMS at 60Hz for 1minute

Voltage rating       :150 VAC maximum

Current Rating      :1.5 Amp maximum

Insulation Resistance:500M-Ohm minimum

Contack Resistance:10m.Ohm minimum

Mechanical Characteristics :

Cable

Gauge     :24 AWG 7/32 Stranded wire  bare copper with  PE insulation, CMR fire rated

Pair Count:4 pair individually colour coded with filler and PVC jacket

Sequence:Wiring sequences in 568 A & B

Durability:1000 mating cycles

RG45 Plug:Polycarbonate, FCC Part68 Subpart F, UL 94C-0

Plug Boot:PVC

Cantact Material:Phosphor bronze with 50 micro-inches gold over  100 micro-inches nickel

Supports Voice, 155/622 Mbps ATM, 270 Mbps digital video, 4/16 Mbps Token Ring, 100 Mbps TP-PMD, Supports 10BASE-T Ethernet, 100BASE-TX Fast Ethernet, Supports 1000BASE-T Gigabit Ethernet, and Broadband video, 100mbps TPDDI, ISDN Broadband video, ISDN