Product
Features :
•Fully
compliant to AS/NZS 3080:2003, ISO/IEC 11801. Edition 2 2002 and
ANSI/TIA/EIA-568-B. Series Connecting Hardware Standard.
•Backward
compatible with Catergory5 and 5e products.
•Flexible
locking eith all Keystone style Wall plate.
•Convenient
with termination them with Tool-less cover.
•Tool-less cap
proteted with slide-out Cable form IDC hold, after temination.
•UL 94V-O
rated.
•Accepts solid
22-24 AWG diameter conductors.
Customer
Benefits :
•Performs
beyond Category6 Standards.
•Various
colours for easier circuit identification.
•Is backward
compatible with Category5 and 5e products, allowing component mixing without
degrading the network below the minimum component category.
•Tool-Less
tyle fits all Key Stone Wall Plates customer access to the most popular plates
on the market.
•For use in
Multi-user Telecommunication Outlet Applications (MUTO) and Consoli-dation
Points (CP).
•Flexible
locking tabs allow for easy removal from Wall Plates.
•Clear IDC
caps that allow for termination varification and assist in cable retention.
•Compatible
with 110 Krone and Bix tools, allwing for wider choice of tools for installers
Color :
•Whit electric
(WE), Black (BK), Soft Grey (SG), Green (GR), Red (RD), Yellow (YL) & Blue
(BU).
Electrical
Characteristics :
Electrical Characteristics
Dielectric
Strength:1,000V
RMS at 60Hz for 1minute
Current
Rating:1.5Amp
maximum
Insulation
Resistance:200M-Ohm
minimum
Contack
Resistance:1m.Ohm
per contact
Temperatur
Rang :-40 C to + 70 C
Transmission
Performance:exceeds
ISO/IEC 11801 Class E AS/NZS 3080:2003 Class E
Mechanical
Characteristics :
Modular
Connector
RJ45 8-Pin
Connector:FCC
part 68, Subpart F and IEC-60603-7 compliant
Durability:1000 insertion cycles min.
Material :Phosphor Bronze with 50 micro-inches of gold over
100 micro-inches nickel plating
IDC Connector
IDC
Conector:Insulation
slicing of 22 to 24 AWG (0.64 to 0.41mm)
Insulation
Diameter (Wire):0.70 - 1.40mm
Durability:10 insertions of any
combination of wire gauge - two wire per slot
Connector
Material:Phosphor
Bronze with nickel plating IDC Body & Cover Material Fire-Retardant, UL
94V-0, Plastic