Features:
1.Compatible with both IEEE802.3at(30W) and
IEEE802.3af (15.4W)
2.Automatically detect and supply power to IEEE802.3at
and IEEE 802.3af compliant powered
devices(PDs)
3. Advanced SAFC function, only supply power to
IEEE 802.3af/at compliant PDs, no worry about damaging other private standard POE
devices or devices without POE function
4.Support port power supply prioritization,
guarantee the continuous power supply
of key nodes
5.Up to 100m network cable transmitting
distance
6.Built-in PSE power supply module, plug-and
play design, easy to install
7. High security performance defending against
power surge
8.Support short-circuit protection function
9.Energy-saving green design, support
auto-switch to standby mode and
auto-detect cable length.
10.Support simple WEB management, easy to
configure the functions of switches
Indicator light
Interface light: Link/Act,
POE Status
Power light: PWR
Power
Input Power Supply: 90~264VAC/50~60Hz/300W
Energy Saving: Comply with “EEE” Energy Efficient Ethernet
Working Environment
Working Temperature: -20~50°C
Storage Temperature: -40~70°C
Operation Humidity: 10%~90% (non-condensing)
Storage Humidity: 5%~95% (non-condensing)
Mechanical Properties
Weight: <8Kg
Dimensions (L×W×H): 440×285×44.5mm
Specification:
Technology
Standard and Protocols: IEEE
802.3af, Power Over Ethernet, IEEE 802.3at, Power Over Ethernet Plus IEEE
802.3u, 100BASE-TX, IEEE
802.3ab, 1000 BASE-T, IEEE 802.3z, 1000 BASE-X,
IEEE 802.3ad, Static or Dynamic Link Aggregation,
IEEE 802.3x, Full-Duplex Flow Control,
IEEE 802.3az, EEE (Energy Efficient Ethernet), IEEE 802.1q, VLAN
IEEE 802.1p, QoS/CoS, IEEE
802.1d, STP (Spanning Tree Protocol), IEEE 802.1w,
Rapid Spanning Tree Protocol
POE Standard: IEEE802.3af/at
Flow control: Back-pressure traffic control under Half-Duplex mode,IEEE
802.3x traffic control under Full-Duplex mode
Ports
Fixed ports: 14*10/100M PoE ports+2*10/100/1000M PoE ports+2*
Gigabit SFP ports
PoE Pin-out:1/2(+), 3/6(-); Customized 4/5(+), 7/8(-)
Exchange Properties:
100M forwarding rate: 1488095pps
100M forwarding rate: 148809pps
10M forwarding rate: 14880pps
Transmit type: Full wire-speed storage and forwarding
MAC address: 16K, Support auto-update, two-way learning
VLAN: Support up to
4096 VLANs, Port-based VLANs, VLANs based on IEEE 802.1q
Switching Capacity: ≥10.8Gbps
Spanning Tree: Spanning
Tree Protocol Rapid Spanning Tree Protocol (RSTP)
Link Aggregation: Support
8 aggregation groups, and a maximum of 4 ports
in each aggregation group
Ring Protection: Support Ring
Protection, provide real-time detecting,quick
alarm, precise localization, smart blocking and auto-recovery
Port Isolation: Isolation between downlink ports without influence the communication between downlink and
uplink ports
Port Flow Control:Back-pressure traffic control under Half-Duplex mode, IEEE
802.3x traffic control under Full-Duplex mode
Port Rate Restriction: Port-based
ingress or egress rate limiting
Jumbo Frame: Maximum
support 9216Byte
Storm Suppression:Support the suppression of broadcast storm based on
forwarding rate
Security:Port-base MAC address binding,Security restriction on port-based MAC address quantity
QOS: SP(Strict
Priority), WFQ (Weighted Fair Queuing), WRR (Weighted Round Robin), 802.1p
(Port Queuing Priority), Differentiated Service Code Point (DSCP Priority)
PoE ouput priority Management: Supported
Physic Medium
10/100Base-TX: UTP category 3/4/5 cables( Maximum 100m)
1000Base-T: UTP
Category 5 cable( Maximum 100m)
1000Base-SX: fiber with
850nm wavelength, supports a max transmission distance of 550m
1000Base-LX: fiber with
1310nm/1550nm wavelength, supports a max transmission
distance of 80km
Network Cable Deployment : Support Auto-MDIX function, automatically identify
straight forward cable and cross-over cable
Negotiation Pattern: Support port auto-negotiation function (automatically
negotiate transmission rate and Duplex modes)
PHY Detection: Detect the connectivity
of network cables
Maintenance: Uploading
or downloading of the configuration data, Uploading
of upgrade patch, Support system logs, WEB-based reset to factory
defaults
Management: Support
WEB-based management