The BELLCOMMS Cat6 Patch Panel Shuttered range of products are the next generation of data communications solutions. The Category6 Patch Panels are a perfect combination of sleek looks and outstanding performance.

Product Features :

•Aesthetic, contemporary design.

•Shuttered outlets/ports.

•High Technology produce low insertion loss of PC Board.

•Powder-coated metal framework.

•Universal colour-coding for 568A and 568B standard.

•Removable reaqr cable management tray

•Compatible with standard 19" equipment frames.

•IDC termination using standard with Krone and 110 style tools.

•Fully compliant to AS/NZS 3080:2003, ISO/IEC 11801 Edition 2 2002and ANSI/TIA/EIA-568-B. Series Connectiong Hardware Standards.

Customer Benefits :

•Contemporary design will improve the aesthetics of all installation.

•Outlet shutters protect the contact pins from dust ingress, insect infestation and the insertion of foreige objects.

•Better than Category 6 Performance.

•Complete with all mounting and cable fixing hardware.

•Rear cable management tray is supplied loose, allowing the install to fit after termination.

•The front labeling system provides a clear and effcient means of identifying circuits.

•Powder coated metal frame is robust and protects the patch panel from

corrosion and scratching.

•Comliance with international standards gives the customer peace of mind that their network will perform to link, channel and applicationrequirements.

•Industry leading Lifetime Warranty - unique to the market!

Electrical Characteristics :

Dielectric Strength:1,000V RMS at 60Hz for 1minute

Current Rating:1.5Amp maximum

Insulation Resistance:200M-Ohm minimum

Contack Resistance:1m.Ohm per contact

Temperatur Rang                :-40 C to + 70 C

Transmission Performance:exceeds ISO/IEC 11801 Class E AS/NZS

3080:2003 Class E

Mechanical Characteristics :

Modular Connector

RJ45 8-Pin Connector:FCC part 68, Subpart F and IEC-60603-7 compliant

Durability:1000 insertion cycles min.

Material :Phosphor Bronze with 50 micro-inches of gold over 100 micro-inches nickel plating

IDC Connector

IDC Conector:Insulation slicing of 22 to 24 AWG (0.64 to 0.41mm)

Insulation Diameter (Wire):0.70 - 1.40mm

Durability:10 insertions of any combination of wire gauge - two wire per slot

Connector Material:Phosphor Bronze with nickel plating IDC Body & Cover Material Fire-Retardant, UL 94V-0, Plastic

Supports Voice, 155/622 Mbps ATM, 270 Mbps digital video, 4/16 Mbps Token Ring, 100 Mbps TP-PMD, Supports10BASE-T Ethernet, 100BASE-TX Fast Ethernet, Supports 1000BASE-T Gigabit Ethernet, and Broadband video,100mbps TPDDI, ISDN Broadband video, ISDN